Are you tired of waiting forever for hot water, well I have the solution to help you get hot water faster! No more wasting gallons of water and time waiting for the shower or sink water to get hot. We can install a recirculation pump kit that will retrofit on your existing hot water system.
The pump can be ran continuously or you can set the timer for different times of the day when you know you will be using hot water, that way when you’re ready you get hot water faster.
Circulating pumps are often used to circulate domestic hot water so that a faucet will provide hot water faster upon demand. In regions where water conservation issues are rising, some local water authorities offer rebates to homeowners who install a circulator pump to save water.
In typical one way plumbing without a circulation pump, water is simply piped from the water heater through the pipes to the tap. Once the tap is shut off, the water remaining in the pipes cools rapidly, producing the familiar wait for hot water the next time the tap is opened. By adding a circulator pump hot water can be circulated through the pipes to the farthest fixture and back to the water heater. The water in the pipes remains always hot during recirculation and you get hot water faster and no water is wasted waiting.
Our retrofit recirculation kit uses the cold water line as the return line. A pump is installed at the water heater, and a comfort valve is installed between the hot and cold water lines under a sink at the farthest point away. This combination creates a pressure differential that allows the cold water in the hot water supply line to by-pass at low volume into the cold water supply line through the thermostatically controlled valve. Hence you get hot water faster.
Call Now if you want Hot Water Faster! 386-774-8080